INOKIM LIGHT2 M GRN Common Problems and Troubleshooting

A true people’s favorite, the INOKIM Light 2 Super perfectly combines portability and performance in an aesthetically designed package. Perfect for anyone who wants reliable and safe transportation in urban environments. Lightweight and easily foldable for loading in your trunk or taking it on bus and train. The Light 2 Super boasts a bigger motor than the Light2 and will take you farther in your journey.

INOKIM LIGHT2 M GRN Overview

Key Specs	Specifications
Product Weight	28 pounds
App-Controlled	No
Voice Assistant Built-in	Not Applicable
Battery Charge Time	4 hours
Maximum Operating Range	30 miles
Maximum Speed	21 miles per hour
Foldable Design	Yes
Color	Green
Product Name	Light2 Max Scooter w/30 miles Max Operating Range & 21 mph Max Speed
Brand	INOKIM
Model Number	LIGHT2 M GRN
Color Category	Green
Product Height	41.3 inches
Product Length	42.5 inches
Product Width	18.5 inches
Maximum Weight Capacity	225 pounds
App-Controlled	No
Voice Assistant Built-in	Not Applicable
Battery Charge Time	4 hours
Maximum Operating Range	30 miles
Maximum Speed	21 miles per hour
Power	36 volts
Powered	Yes
Batteries Included	Yes
Battery Size	Battery pack
Battery Chemistry	Lithium-ion
Rechargeable Battery	Yes
Battery Charger Included	Yes
Removable Battery	Yes
Charging Interface(s)	Proprietary
Battery Amperage	13.6 ampere hours
Battery Voltage	36 volts
Wattage	350 watts
Assembly Required	Yes
Recommended Minimum Age	16 years
Twist Grip Throttle	No
Removable Seat Included	No
Material	Aluminum
Number Of Wheels	2
Manufacturer’s Warranty – Parts	1
Manufacturer’s Warranty – Labor	1

Causes of Common Problems with the INOKIM LIGHT2 M GRN

This section will address possible problems and solutions with the INOKIM LIGHT2 M GRN Electric Scooter.

Common Problems and Troubleshooting with the INOKIM LIGHT2 M GRN

1. Battery Not Charging

Description: The battery of your INOKIM LIGHT2 M GRN electric scooter is not charging when connected to a power source.

Cause: There could be several reasons for this issue, such as a faulty charger, loose connections, or a defective battery.

Troubleshooting:

1. Make sure the charger is properly plugged into a working power outlet.
2. Check all connections between the charger, battery, and scooter for any loose or damaged parts. Secure or replace as necessary.
3. If the charger and connections are fine, try using a different charger to see if the issue persists.
4. If none of the above steps resolve the problem, it is likely a battery issue. Contact the manufacturer or authorized service center for further assistance.

2. Motor Not Functioning

Description: The motor of your INOKIM LIGHT2 M GRN electric scooter is not working or fails to provide propulsion.

Cause: There could be various causes for this problem, including a faulty motor, loose wiring, or a malfunctioning controller.

Troubleshooting:

1. Check the wiring connections between the motor, controller, and battery. Ensure all connections are secure and undamaged.
2. If the connections are fine, test the motor by connecting it directly to the battery. If it doesn’t work, the motor may need to be replaced.
3. If the motor works fine, the issue might be with the controller. Contact the manufacturer or authorized service center for further assistance.

3. Brakes Not Responsive

Description: The brakes of your INOKIM LIGHT2 M GRN electric scooter are not responding or providing sufficient stopping power.

Cause: This problem can occur due to worn brake pads, loose cables, or misaligned brake calipers.

Troubleshooting:

1. Inspect the brake pads for wear and tear. Replace them if they are worn down.
2. Check the brake cables for any looseness or damage. Adjust or replace them as necessary.
3. If the brake pads and cables are fine, check the alignment of the brake calipers. Adjust them if they are misaligned.
4. If the issue persists, there may be a problem with the brake system itself. Contact the manufacturer or authorized service center for further assistance.

4. Loose Handlebars

Description: The handlebars of your INOKIM LIGHT2 M GRN electric scooter feel loose or wobbly.

Cause: Loose handlebars can be caused by loose bolts or a damaged stem.

Troubleshooting:

1. Check the bolts securing the handlebars to the stem. Tighten them if they are loose.
2. If the handlebars continue to feel loose, inspect the stem for any damage. Replace it if necessary.
3. Ensure that the handlebars are properly aligned and tightened to the desired position.

5. Non-responsive LCD Display

Description: The LCD display of your INOKIM LIGHT2 M GRN electric scooter is not turning on or not responding to inputs.

Cause: This issue can occur due to a loose connection, a faulty display, or a drained battery.

Troubleshooting:

1. Check the connection between the LCD display and the controller. Ensure it is securely plugged in.
2. If the connection is fine, try resetting the scooter by turning it off and on again.
3. If the display still doesn’t work, try charging the battery fully and then testing the scooter again.
4. If none of the above steps resolve the problem, the LCD display may need to be replaced. Contact the manufacturer or authorized service center for further assistance.

6. Uneven Power Delivery

Description: The power delivery of your INOKIM LIGHT2 M GRN electric scooter feels uneven, with intermittent bursts or loss of power.

Cause: This issue can be caused by a faulty throttle, loose wiring connections, or a malfunctioning controller.

Troubleshooting:

1. Check the throttle for any physical damage or signs of wear. Replace it if necessary.
2. Inspect the wiring connections between the throttle, controller, and battery. Secure or replace any loose or damaged connections.
3. If the issue persists, the problem might lie with the controller. Contact the manufacturer or authorized service center for further assistance.

7. Sudden Shuts Down

Description: Your INOKIM LIGHT2 M GRN electric scooter shuts down abruptly during use, without any warning or apparent reason.

Cause: This problem can occur due to a drained battery, loose wiring, or a malfunctioning power switch.

Troubleshooting:

1. Check the battery charge level and ensure it is adequately charged. Recharge the battery if necessary.
2. Inspect the wiring connections between the battery, controller, and other components. Secure or replace any loose or damaged connections.
3. If the issue continues, the power switch may be faulty. Contact the manufacturer or authorized service center for further assistance.

8. Excessive Vibration

Description: Your INOKIM LIGHT2 M GRN electric scooter experiences excessive vibrations during operation, leading to discomfort and reduced stability.

Cause: Excessive vibrations can be caused by misaligned wheels, loose axle nuts, or worn-out tires.

Troubleshooting:

1. Inspect the wheels for any signs of misalignment. Adjust or align them properly.
2. Check the axle nuts and ensure they are tightened securely. Adjust them if necessary.
3. If the vibrations persist, examine the tires for wear or damage. Replace them if needed.

9. Intermittent Lights

Description: The lights on your INOKIM LIGHT2 M GRN electric scooter flicker or intermittently turn on and off.

Cause: This issue can be caused by loose connections, faulty wiring, or a malfunctioning light switch.

Troubleshooting:

1. Check the wiring connections for the lights and ensure they are securely connected.
2. Inspect the wiring for any signs of damage or wear. Replace any faulty wiring.
3. If the lights continue to flicker, the light switch may be malfunctioning. Contact the manufacturer or authorized service center for further assistance.

10. Frequent Tire Punctures

Description: The tires of your INOKIM LIGHT2 M GRN electric scooter are prone to frequent punctures, requiring frequent repairs or replacements.

Cause: This problem can be caused by riding over sharp objects, low-quality tires, or improper tire maintenance.

Troubleshooting:

1. Avoid riding over rough or sharp surfaces that could cause punctures.
2. Consider upgrading to higher-quality tires that are more resistant to punctures.
3. Regularly inspect the tires for any signs of wear or damage. Replace them as needed.

11. Faulty Kickstand

Description: The kickstand of your INOKIM LIGHT2 M GRN electric scooter is not functioning properly, making it difficult to stabilize the scooter when parked.

Cause: This issue can be caused by a loose or broken kickstand mechanism.

Troubleshooting:

1. Check the kickstand mechanism for any looseness or damage. Tighten or replace it if necessary.
2. Ensure that the kickstand is properly aligned and securely latched in its extended position.
3. If the problem persists, contact the manufacturer or authorized service center for further assistance.

12. Inconsistent Speedometer

Description: The speedometer on your INOKIM LIGHT2 M GRN electric scooter provides inaccurate or inconsistent speed readings.

Cause: This issue can occur due to a faulty speed sensor, loose wiring, or interference with other electronic components.

Troubleshooting:

1. Check the wiring connections between the speed sensor and the display. Secure or replace any loose or damaged connections.
2. If the issue persists, the speed sensor may be faulty. Contact the manufacturer or authorized service center for further assistance.

13. Unresponsive Thumb Throttle

Description: The thumb throttle on your INOKIM LIGHT2 M GRN electric scooter is not responding to inputs or feels unresponsive.

Cause: This problem can be caused by a faulty throttle mechanism, loose wiring, or a malfunctioning controller.

Troubleshooting:

1. Inspect the thumb throttle for any physical damage or signs of wear. Replace it if necessary.
2. Check the wiring connections between the throttle, controller, and battery. Secure or replace any loose or damaged connections.
3. If the issue continues, the problem might lie with the controller. Contact the manufacturer or authorized service center for further assistance.

14. Uncomfortable Ride

Description: Your INOKIM LIGHT2 M GRN electric scooter provides an uncomfortable ride, with excessive vibrations and lack of suspension.

Cause: This issue can be caused by the scooter’s design, lack of suspension, or low-quality components.

Troubleshooting:

1. Consider adding aftermarket suspension components or shock absorbers to improve the ride comfort.
2. Ensure that the tires are properly inflated to the recommended pressure for a smoother ride.
3. If the discomfort persists, contact the manufacturer or authorized service center for further assistance.

15. Unreliable Range

Description: Your INOKIM LIGHT2 M GRN electric scooter does not provide the expected range and runs out of battery quickly.

Cause: This problem can be caused by a worn-out battery, excessive weight load, or riding in demanding conditions.

Troubleshooting:

1. Check the battery’s age and condition. If it is old or degraded, consider replacing it with a new one.
2. Avoid exceeding the scooter’s maximum weight load to optimize the range.
3. Take into account external factors such as terrain, inclines, and wind resistance that may affect the scooter’s range.

16. Noisy Motor

Description: The motor of your INOKIM LIGHT2 M GRN electric scooter produces excessive noise during operation.

Cause: This issue can be caused by a misaligned motor, worn-out bearings, or internal motor damage.

Troubleshooting:

1. Inspect the motor for any signs of misalignment. Adjust or realign it if necessary.
2. Check the bearings of the motor for wear or damage. Replace them if needed.
3. If the noise persists, the motor may be damaged and require professional repair or replacement. Contact the manufacturer or authorized service center for further assistance.

17. Loose Fenders

Description: The fenders of your INOKIM LIGHT2 M GRN electric scooter are loose or rattling.

Cause: This problem can be caused by loose mounting screws or damaged fender brackets.

Troubleshooting:

1. Tighten the mounting screws of the fenders to ensure a secure fit.
2. Inspect the fender brackets for any signs of damage. Replace them if necessary.
3. If the fenders continue to be loose, consider using additional reinforcement or contacting the manufacturer or authorized service center for further assistance.

18. Non-responsive Electric Brake

Description: The electric brake of your INOKIM LIGHT2 M GRN electric scooter is not responding when activated.

Cause: This issue can be caused by a faulty brake sensor, loose wiring connections, or a malfunctioning controller.

Troubleshooting:

1. Check the wiring connections between the brake sensor, controller, and battery. Secure or replace any loose or damaged connections.
2. If the connections are fine, test the brake sensor for proper functionality. Replace it if necessary.
3. If the electric brake still does not respond, the controller may be at fault. Contact the manufacturer or authorized service center for further assistance.

19. Unresponsive Power Button

Description: The power button of your INOKIM LIGHT2 M GRN electric scooter does not respond when pressed.

Cause: This problem can be caused by a faulty power button, loose wiring connections, or a malfunctioning controller.

Troubleshooting:

1. Check the wiring connections between the power button, controller, and battery. Secure or replace any loose or damaged connections.
2. Inspect the power button for any physical damage or signs of wear. Replace it if necessary.
3. If the issue persists, the controller may be malfunctioning. Contact the manufacturer or authorized service center for further assistance.

20. Uneven Tire Wear

Description: The tires of your INOKIM LIGHT2 M GRN electric scooter exhibit uneven wear patterns.

Cause: This issue can be caused by misalignment, overinflation, underinflation, or improper tire maintenance.

Troubleshooting:

1. Ensure that the tires are properly aligned and centered on the rims. Adjust them if necessary.
2. Check the tire pressure and ensure it is within the recommended range. Adjust as needed.
3. Regularly rotate the tires to promote even wear across all tires.

21. Loose Handlebar Grips

Description: The handlebar grips of your INOKIM LIGHT2 M GRN electric scooter are loose or slipping.

Cause: This problem can be caused by worn-out grips, loose handlebar ends, or lack of adhesive.

Troubleshooting:

1. Check the grips for wear or damage. Replace them if necessary.
2. Tighten the handlebar ends to ensure a secure fit.
3. If the grips continue to slip, apply adhesive specifically designed for handlebar grips.

22. Unstable Folding Mechanism

Description: The folding mechanism of your INOKIM LIGHT2 M GRN electric scooter is unstable or fails to hold the scooter securely when folded.

Cause: This issue can be caused by loose locking mechanisms, worn-out hinges, or damaged folding components.

Troubleshooting:

1. Inspect the locking mechanisms and tighten any loose parts.
2. Check the hinges and folding components for wear or damage. Replace them if needed.
3. Ensure that the folding mechanism is properly aligned and latches securely when folded.

23. Non-functional Horn or Bell

Description: The horn or bell of your INOKIM LIGHT2 M GRN electric scooter is not functioning.

Cause: This problem can be caused by a faulty switch, loose wiring connections, or a malfunctioning horn/bell unit.

Troubleshooting:

1. Inspect the wiring connections between the switch, horn/bell unit, and battery. Secure or replace any loose or damaged connections.
2. Check the horn/bell unit for any physical damage. Replace it if necessary.
3. If the issue persists, the switch may be faulty. Contact the manufacturer or authorized service center for further assistance.

24. Unresponsive Brake Lights

Description: The brake lights of your INOKIM LIGHT2 M GRN electric scooter do not illuminate when the brakes are applied.

Cause: This issue can be caused by a faulty brake light switch, loose wiring connections, or a malfunctioning controller.

Troubleshooting:

1. Check the wiring connections between the brake light switch, controller, and battery. Secure or replace any loose or damaged connections.
2. Inspect the brake light switch for any physical damage or signs of wear. Replace it if necessary.
3. If the issue persists, the controller may be at fault. Contact the manufacturer or authorized service center for further assistance.

25. Limited Spare Parts Availability

Description: Finding spare parts for your INOKIM LIGHT2 M GRN electric scooter is challenging due to limited availability.

Cause: This problem can be caused by a lack of supply from the manufacturer or limited aftermarket support for the specific scooter model.

Troubleshooting:

1. Contact the manufacturer or authorized dealers to inquire about spare parts availability.
2. Explore online forums or scooter communities for potential alternative sources of spare parts.
3. If spare parts are difficult to find, consider contacting local repair shops with expertise in electric scooters for assistance.

INOKIM LIGHT2 M GRN Electric Scooter User Reviews

Introduction: In this section, we will provide an overview of user reviews for the INOKIM LIGHT2 M GRN Electric Scooter, sourced from the Walmart website.

Positive Reviews from INOKIM LIGHT2 M GRN Electric Scooter Users

While considering the reviews available online, many users expressed satisfaction with various aspects of the INOKIM LIGHT2 M GRN Electric Scooter. Here are some positive experiences highlighted by users:

1. Smooth and Comfortable Ride: Some users were satisfied with the scooter’s smooth and comfortable ride, thanks to features like air tires and a low center of gravity.
2. Powerful Motor and Fast Acceleration: Several users praised the scooter’s powerful motor, which provided them with fast acceleration and a top speed of up to 21 mph.
3. Long Range: Users appreciated the scooter’s long-range capability, with a range of up to 30 miles, which allowed them to travel longer distances without worrying about recharging.
4. Portability and Folding Mechanism: Many users found the scooter lightweight and easily foldable, making it convenient for transportation and storage.
5. Sturdy Build Quality: Some users expressed satisfaction with the scooter’s sturdy build quality and durable construction, which contributed to its overall reliability.

Overall, the positive feedback from INOKIM LIGHT2 M GRN Electric Scooter users suggests that the scooter offers a smooth and comfortable ride, impressive acceleration, a long-range capability, and convenient portability.

Negative User Reviews of the INOKIM LIGHT2 M GRN Electric Scooter

While analyzing negative user reviews of the INOKIM LIGHT2 M GRN Electric Scooter, the following issues were mentioned by some users:

1. Quality Control and Customer Support: Some users expressed dissatisfaction with the scooter’s quality control, reporting issues like small scratches, ripped protective guards, and lack of response from customer support.
2. Brake Problems: A few users mentioned experiencing issues with the scooter’s brakes, such as rubbing or noisy brakes, which affected their riding experience.
3. Minor Design Flaws: Several users highlighted minor design flaws, such as inadequate lighting, lack of grip on the step board, and the positioning of the rear light.
4. Limited Availability of Spare Parts: Some users found it challenging to find spare parts for the scooter due to limited availability from the manufacturer.

While negative reviews exist, it is important to note that they represent a portion of the overall user experiences and should be considered alongside positive feedback and individual circumstances.

All the information about user reviews in this section is sourced from the Walmart website.

INOKIM LIGHT2 M GRN Electric Scooter Manual

INOKIM LIGHT2 M GRN operating instructions can be found on the manufacturer’s website. Please visit the official website of INOKIM or refer to the user manual provided with your scooter for detailed instructions on how to operate and maintain the INOKIM LIGHT2 M GRN Electric Scooter.

INOKIM LIGHT2 M GRN Frequently Asked Questions

1. How do I fold and unfold the INOKIM LIGHT2 M GRN Electric Scooter?

To fold the INOKIM LIGHT2 M GRN Electric Scooter, follow these steps:

1. Ensure that the scooter is powered off and in the upright position.
2. Release the folding latch located near the base of the handlebar stem.
3. Gently fold the handlebar stem down towards the deck until it locks into place.

To unfold the scooter, reverse the above steps, making sure to securely latch the folding mechanism before riding.

2. How long does it take to fully charge the battery of the INOKIM LIGHT2 M GRN Electric Scooter?

The INOKIM LIGHT2 M GRN Electric Scooter’s battery takes approximately 4 hours to fully charge. It is recommended to use the provided charger and plug it into a standard electrical outlet for optimal charging performance.

3. Can the INOKIM LIGHT2 M GRN Electric Scooter be ridden in wet or rainy conditions?

The INOKIM LIGHT2 M GRN Electric Scooter is designed to be water-resistant but not completely waterproof. It is recommended to avoid riding in heavy rain or through deep puddles to prevent water damage. If the scooter gets wet, wipe it dry as soon as possible to maintain its performance and longevity.

Hover-1 Highlander Common Problems and Troubleshooting

Hover-1 Night Owl Common Problems and Troubleshooting

Hover-1 Switch Electric Skateboard Scooter Common Problems and Troubleshooting

Conclusion

For any issues or problems with your INOKIM LIGHT2 M GRN Electric Scooter, it is always recommended to consult the user manual provided by the manufacturer. Additionally, if you encounter difficulties or have further questions, contacting customer service or visiting an authorized service center can provide you with the best assistance and support tailored to your specific needs.